個人簡介

 D. N. WANG received the B.Sc. degree in Telecommunications from Beijing University of Posts and Telecommunications in 1983, the MBA degree from the University of Ulster, United Kingdom, in 1989, and Ph.D degree from City University, U.K. in 1995. 

From 1996 to 1997, he was a Postdoctoral Fellow in the Dept. of Electronics, the Chinese University of Hong Kong. From 1997 to 1998, he worked in China Telecom (Hong Kong) Ltd, wher he was a Senior Telecommunication Engineer. Since 1998, he has been with the Dept. of Electrical Engineering, the Hong Kong Polytechnic University. His main research interests are ultrafast optics, femtosecond laser micromachining, optical fiber communications and optical fiber sensors. He has more than 160 international journal publications.

2015亞洲激光論壇 （深圳）
演講題目

 飛秒激光微加工在光纖上的應用Femtosecond laser micromachining on optical fiber

演講摘要

飛秒激光在對透明介質的三維加工處理方面展現了優異的性能，特別是對玻璃材料的處理能力使其成為光纖微加工的有力工具。由于光纖通常由石英玻璃材料拉制而成，其直徑僅比人類的頭發略粗，因此傳統的加工手段很難對光纖進行精細微加工。而采用飛秒激光微加工技術則能夠克服這些難題。近年來，飛秒激光微加工技術已經廣泛應用于光纖器件的制備，包括光纖光柵、微型干涉儀的制備以及眾多光纖微結構的制作。本報告將討論一些光纖的飛秒激光微加工實驗中涉及的參數以及相關光纖器件的應用。

Femtosecond lasers exhibit excellent capability in performing three-dimensional processing in transparent materials, especially glass, which makes them a powerful tool for micromachining optical fibers. Optical fiber is typically made of silica glass and functions as a waveguide, which is small in dimension; only slightly larger than that of human hair. Thus, micromachining of optical fibers is difficult to achieve via conventional manufacturing methods. An efficient method to overcome the above mentioned difficulty is to use a femtosecond laser. In recent years, femtosecond laser micromachining techniques have been used in a wide range of optical fiber applications; from fiber grating inscription to interferometer fabrication and recently for optical fiber microstructure creation. This presentation will explain the experimental parameters involved in femtosecond laser micromachining of optical fibers and their applications in fabrication of optical fiber devices.